How Do You Remote Start A 2008 GMC Sierra?

How do I remote start my GMC Sierra?

Remote Vehicle Start✦ Press and release the Lock button and then press and hold the button until the turn signal lamps flash to start the engine from outside the vehicle.

After entering the vehicle, turn on the ignition.

During a remote start, the engine will run for 10 minutes..

Does my GMC Sierra have remote start?

Look at your key fob. If there is a circle with an arrow on it, you have remote start. … The little book in the glove box look up remote start in the index see if it apply s to your truck and follow the steps.

Is OnStar remote start free?

The service is free for five years and includes the following services: Keyfob services that enable owners to remotely start, lock/unlock doors, as well as activate the horn and lights from the myChevrolet, myBuick, myGMC or myCadillac or OnStar RemoteLink app. OnStar Vehicle Diagnostics.

How do you use a remote start?

To remote start your vehicle, first press the lock button to lock all the doors. Then press the remote start button twice. The exterior lamps will flash twice. The horn will sound if the system fails to start, unless quiet start is on.

How do I remote start my 2020 GMC Sierra?

Press and release the button that looks like a padlock. 3. Directly after pressing the padlock, press and hold the circular arrow button until the turn signals on your GMC vehicle begin to flash. If you are not in view of your auto, press and hold the circular arrow button for two to four seconds.

How do I know if my Chevy has remote start?

The best way to tell whether you have it is to look at the key fob; the remote-start button is shaped like a curved arrow. If you don’t see it, your car is not equipped with it.

Does my GMC app work without OnStar?

How Vehicle Access Features Work. The vehicle access features of myGMC require an active OnStar plan — whether it’s the free Basic Plan or one of the paid subscriptions. It also requires the user to download the app, create an OnStar user ID and password, and log into myGMC.

Can I start my GMC truck with my phone?

SHARE: Your GMC truck or SUV was designed to be capable and connected. … Touching the “Remote Commands/ Key Fob” button on the app brings up controls that allow you to lock or unlock your GMC, sound its horn and flash its lights, or remotely start the engine, if properly equipped.

Why is OnStar stopping in 2020?

OnStar also features SOS functionality, which can be used to call for help in the event of an accident or emergency; this feature will be stopped too, as Vauxhall says that “OnStar Emergency Assistance services are not eCall services for the purposes of the eCall Regulations.”

How do I track my GMC truck?

Due to logistical reasons, GM Authority no longer provides GMC order tracking. If you are interested in tracking your vehicle, please visit GMC.com and initiate a live chat session. There, you will be able to provide the representative with your vehicle order number, which is provided to you by your dealer.

How much does Chevy charge for remote start?

The Remote Access Plan is available for $14.99 per month.

What is GMC connected access?

GMC Connected Access1 includes standard connectivity with a number of tools to help improve your driving behaviors, better maintain and manage your vehicle’s health, and potentially even save you money along the way. GMC Connected Access empowers you to get more out of your vehicle, and do more with it.

Will my remote start not work if my check engine light is on?

If the ‘Check Engine Light’ or Malfunction Indicator Lamp (MIL) is illuminated, the remote start will not work. Don’t panic, one of the reasons the MIL can illuminate is due to a loose gas cap! Reseal the cap, restart the car, and retry step #1!

What is the valet button on a remote start?

Valet mode is a setting in Firstech systems that will shut down the alarm system and the remote starter. It will only allow the remotes to retain key-less entry to be used to lock and unlock the doors.

Can a remote start drain your battery?

All electronics draw power from your battery Whether your vehicle is loaded with aftermarket tech or runs bone-stock, every electrical system in your vehicle draws power from your battery. … However, it is still possible for a remote car starter to consume too much power from your battery.

How do you program a remote start on a 2008 GMC Sierra?

PRESS and HOLD the Trip Odometer Reset Button for approximately 3 seconds until “REMOTE KEY LEARNING ACTIVE” displays. Vehicle is now in Programming Mode. PRESS and HOLD LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds.

Why is my remote start not working?

Cause: In most cases, the under-hood pin switch is broken or corroded. Any remote starter must have a method of preventing the vehicle from starting when the hood is open. Without this, a mechanic could be seriously injured if the vehicle was remotely started while they were working on it.

How do you remote start a 2007 GMC Sierra?

Press and hold the Remote Start button (the middle button with a circular arrow on it) for at least four seconds. When you see the lights flash, your track has started. When you enter your truck, put the keys in the ignition and turn them as you normally would to start the vehicle.

What does relearn remote key mean?

Press and hold the odometer stem for three seconds. This is located in front of the driver’s seat, behind the steering wheel. Do this until the display board reads “Relearn Remote Key.” If your car does not do this, you may have your key in the wrong position. You can always pull your key out and start again.

What is GMC remote access plan?

The Remote Access Plan includes everything in Connected Access, as well as other useful features. To upgrade to the Remote Access Plan or renew an existing service plan, you can push your blue OnStar button, or sign up online. Once active, you can also access information about your plan through your mobile app.