Quick Answer: Do I Need To Replace Water Pump With Timing Belt?

How often does a water pump need to be replaced?

A water pump should last 60,000 to 90,000 miles, about the same amount of time as a timing belt.

“Many water pumps are located behind the timing cover,” Beckwith says.

“It makes sense to replace the water pump when you have the timing cover off and are already that deep into a labor-intensive repair..

What are the signs of a water pump going bad?

Symptoms of a Bad or Failing Water PumpCoolant leak at the front-center of your car. … Water pump pulley is loose and making whining sounds. … Engine is overheating. … Steam coming from your radiator.

When should you replace a car thermostat?

Aside from this type of preventive maintenance, a thermostat doesn’t need to be replaced unless it stops opening and closing when it’s supposed to. If it sticks in the closed position, that traps coolant in the engine so that it overheats.

What does a worn timing belt sound like?

The first sign of wear is “noise”. While the engine is running, listen to hear if any noise is coming from the timing cover or front assembly. … Bad bearings make a high pitched “whine” or “growling” noise after the engine has been started.

Does water pump affect timing belt?

The water pump may even get stuck and adversely affect the timing belt system. If the water pump gets stuck, the timing belt (which runs on the back of the water pump) will be slipping onto the water pump. The extreme friction will damage the back of the timing belt and overheat the pulleys/bearings.

What are the first signs of a blown head gasket?

Bad head gasket symptomsWhite smoke coming from the tailpipe.Water leaking from the tailpipe.Bubbling in the radiator and coolant reservoir.Milky white coloration in the oil.Engine overheating.

Can I replace timing belt myself?

My short answer is, “No”. I would not recommend your average vehicle owner to attempt replacing their timing belt and water pump. We often see cars come in here with minor to major problems stemming from another shop installing a timing belt wrong.

Does a new timing belt improve performance?

No timing belt will give an increase in performance – it’s just not possible. Its main job is to keep the timing in check. Having your timing belt replaced and noticing an increase in performance is just a mix of the engine operating at peak efficiency and a good hit of placebo effect thrown in for good measure!

How long do water pumps last?

100,000 milesThe service life of most original equipment water pumps should be 100,000 miles or longer. Some cheap replacement water pumps, however, may not last 30,000 miles before they start to leak. That’s why you should recommend a top-quality replacement water pump if a customer’s old water pump has called it quits.

What causes a water pump to go bad?

The majority of water pump failures are caused by some other factor than a bad-quality water pump. It’s easy to blame the pump. … A faulty mechanical seal caused by bad installation practices is the most common cause of premature water pump failure.

Is changing a water pump easy?

While removing the pump is not difficult, you must have experience removing and replacing timing belts and their various components. It takes just as much work to get down to the timing belt as it does the water pump, therefore you should plan on replacing the belt at the same time.

How much does it cost to replace a home water pump?

The average cost to replace a well pump is $1,623, or between $925 and $2,404, according to more than 600 surveyed homeowners. Shallow pumps cost around $1,000 to install, while deep-well projects cost roughly $2,000. Most well pump units retail for between $100 and $1,200.

How much does it cost to replace timing belt?

The majority of the cost is labor, because many parts need to be removed from the engine to gain access to the belt. A typical timing belt will only cost between $25 and $50, but the repair takes at least a few hours. The labor cost to replace a timing belt can range from $200 – $900.

How do you know when timing belt needs changing?

Check out these symptoms of a bad or failing timing beltTicking noise coming from the engine. The timing belt is attached by way of a series of pulleys to the engine’s crank and cam shaft. … Engine won’t turn over. … Engine misfires. … Oil leaking from in front of the motor.

How long does it take to change a water pump and timing belt?

1-3 hoursChanging a timing belt and water pump can take anywhere from 1-3 hours depending on your skill level, so make sure you have the time and space to complete the job.

Should I replace thermostat with water pump?

Most of the time, RRT will recommend replacing the thermostat at the same time as the water pump. In almost every case, the thermostat is located adjacent to the water pump and needs to be removed to access it. This saves you labor as you usually only would need to purchase the part during this job.

How long does a timing belt take to change?

4 to 6 hoursThe timing belt can be completed at the same time; but typically private mechanics or shops will charge for individual hour replacement; so another 4 to 6 hours roughly. If you’d like, feel free to submit a quote request for the water pump replacement and timing belt replacement.

Can you drive a car with a bad water pump?

However, it not advisable to keep driving a car with a bad water pump because it can lead to overheating which will eventually result in complete damage of your car engine. … With a bad water pump in a car, certainly, the car will move but, if you do not act fast by replacing it, it can cause the engine system to fail.

Does the water pump affect the heater?

2. Heater has fluctuating heat. The auxiliary water pump is a consistent flowing device that circulates warm coolant into the heater core – regardless of how fast your engine is running. Because of this fact, if you set a temperature on the thermostat control (if your car has one), it should remain solid.

Is changing a timing belt hard?

Because the timing belt is difficult to remove, Higgins recommends simultaneously replacing the timing belt tensioner and serpentine belts. “There is very little labor involved once the timing belt is removed, and these components have a high failure rate,” Higgins says.